Software
Commander SK 0.33 hp to 200
hp
115 / 208-230 / 460 / 575 / 690 Volts
General Purpose AC Drive
Control Techniques software suite makes it easy to access the
complete feature set of our drives. These tools
provide quick setup of the drive, optimize tuning,
configuration back-up, onboard PLC programming
and communications link set up.
- CTSoft - Drive configuration
- CTScope - Software oscilloscope
- SyPTLite - Ladder program editor
- CTOPCServer - OPC compliant server for interfacing with Control
Techniques drives
The Software tools communicate using Ethernet, Serial or
USB connections. Ethernet allows the software tools to easily
use the internet infrastructure allowing Control Techniques drives
to be accessed remotely from virtually anywhere around the
world.
CTSoft
CTSoft is a configuration tool for commissioning, optimizing and
monitoring Control Techniques drives. It allows you to:
- Easily configure the drive using wizards
- Read, save and load drive configuration settings
- Monitor drive paramenters and status
- Visualize and modify the configuration with live animated
diagrams
CTSoft is free of charge and can be obtained by
clicking the download tab on this page.
CTScope
CTScope is a full featured software oscilloscope for viewing and
analyzing changing values within the drive. The time base can
be set to give high speed capture for tuning or intermittent
capture for longer term trends. The interface is based on a
traditional oscilloscope, making it familiar to engineers across
the globe.
CTScope is free of charge and can be obtained by clicking the
download tab on this page.
SyPTLite
SyPTLite is an easy to use ladder logic program editor, suitable
for simple drive applications. SyPTLite is ideal for
controlling basic logic and sequencing with LogicStick PLC.
SyPTLite is free of charge and can be obtained by clicking
the download tab on this page.
CTOPCServer
CTOPCServer is an OPC compliant server
that allows PCs to communicate with Control Techniques
drives. The server supports communication using
Ethernet, Serial RS485 and USB. OPC is a standard
interface on SCADA packages and is widely supported within
Microsoft products. The server is supplied free of charge and
can be obtained by clicking the download tab on this page.
Click here to see our complete list of
all our available software.